1. thermoplastic hoses
    • Suitable for industrial gases, hydraulic and pneumatic applications
    • Easy cutting and processing, especially with textile fibre reinforced hose types
    • Lightweight by design – more than 50% weight reduction compared to conventional hydraulic hoses possible
    • For very high working pressures up to 400 MPa 
    • Wide temperature range from -73°C up to 232°C
    • Small bend radii to compact design to save installation space


  2. hydraulic hoses
    • Full range of hoses with pure nitrile/rubber inner tubes, from 1 and 2 wire braided through to  6-layer multi-spiral hoses
    • Includes such features as constant working pressures, low expansion, low temperature and high temperature applications
    • A wide variety of hoses and assemblies which meets SAE, DIN, ISO and MSHA standards
    • Provides a variety of abrasion resistant cover choices with maximum flexibility


  3. stainless steel metal  hoses
    • For extreme conditions where other hoses fail
    • For temperatures up to 1,500°F (816°C)
    • Available with no braid, one braid, or two braids
    • Provides the lowest permeation rate of any hose available
    • Available with no braid, one braid, or two braids







  4. fluoropolymer  hoses
    • For temperatures up to 500°F (260°C) and/or corrosive chemical applications or where high purity is needed
    • Inner core materials include PFA, High Purity PFA, and PTFE; braiding materials include Stainless Steel, PVDF, Polypropylene, and Nomex
    • Available with a smoothbore or convoluted seamless inner core


  5. ultra high pressure hoses
    • Series of multi-spiral  wire reinforced hoses specifically designed for oilfield applications
    • External thermoplastic sheath is up to 15 times more resistant to environmental  impacts and working conditions than rubber  materials, reducing maintenance cost and frequent hose replacements. 
    • For temperature up to 158 ° F (70 °C), short term 125 °C and Working pressure from 5,000 psi (345 bar)  up to 15,000 psi (1035 bar)
    • Polyamide (PA11) core tube and Fluor polymer technology for cleanliness
    • Eliminates the joining and potential for leak age therefore avoiding spills and environmental damage


  1. Contact

    Phone : +216 71 90 50 95
    Fax : +216 71 90 50 85
    E-mail :
  2. Location

    Rue Abderrahmen Azzem ,
    Rés. El Wifek - Bloc A, App.44 - 1073
    Montplaisir, Tunis
  3. Navigation